The customer requested two things of Isomag bearing isolators, stop the egress of oil, and have a seal that will last the maintenance life cycle goal.

The Aurora 3550 XL pump is a popular ANSI pump found in paper mills and chemical plants. The features of Isomag bearing isolators that are...

Isomag bearing isolators cure the problem of oil leakage in your Amarillo A-36 and put an end to the oily mess in your cooling tower water...

Isomag bearing isolators stop water and condensate from contaminating your turbine oil. Isomag bearing seals utilize proven lapped flat face sealing technology putting an end to leaky labyrinths, and eliminating the need to drain water from your turbine oil....

another failure on their Coppus RLHA 24 steam turbine, a representative from John Crane introduced the refinery to Isomag bearing isolators...

In 2016 Honeywell in Baton Rouge, Louisiana was repairing a Cleveland Gear enclosed drive gearbox. This triple reduction right angle gearbox...

Shell Chemical was introduced to Isomag bearing isolators in 2005, as they were looking for a bearing seal that can last on their Pfaudler HU250.

The Lightnin mixer series 70 is positioned vertically, and needed positive sealing. Isomag bearing isolators were introduced...

Dakota Gasification was in need of a bearing isolator that could contain oil mist within the bearing housing of their Flowserve HPX API Pump...

In 2009, Sulzer decided to use Isomag bearing isolators on their ZE/ZF API pump. This batch of pumps went to an oil refinery using oil mist...