BLOG

March 29, 2018

The Isomag bearing isolators proved worthwhile when leaks and bearing contamination no longer occurred. While effectively protecting the bearings, these Isomag bearing isolators also left the shafts of the gearbox unharmed.

March 29, 2018

John Crane Swedesboro's customer, Phillips 66 in Linden, New Jersey, was in need of a bearing isolator that could contain oil mist within the bearing housing

March 28, 2018

A question that is frequently asked is if Isomag makes a bearing isolator with a bolt on design. We do!

March 28, 2018

introduced the refinery to Isomag bearing isolators as the perfect solution to their growing problem. Isomag bearing isolators eliminate stray oil mist...

March 27, 2018

Since then, they have been installing Isomag bearing isolators in all of their pumps and they have held in all of the lubrication freeing up maintenance time...

March 26, 2018

IsoMag Corporation and Pumpworks Teamed Up to Produce an Innovative ANSI Power Frame that Provides Unsurpassed Bearing Life

March 24, 2018

Isomag bearing isolators are the best of both worlds! Isomag bearing isolators are a positive seal that wont damage the shafts of your gearbox, and work in horizontal or vertical up or down positions for the right angle gearboxes.

March 24, 2018

Since installed in 2015, the end user reports that the seals are running smoothly at low temperatures with no evidence of water contamination. The old practice of evaporating water out of the oil twice a year is no longer necessary.

March 22, 2018

With a need for a longer run time and a positive seal, Shell specified Isomag to replace the incumbent lip seal. Isomag bearing isolators do not damage the host equipment and fit into place with the need for modification.  The pump has been in operation for 4 years now...

March 22, 2018

Philadelphia Gear gearboxes are an industrial workhorse, found on oil refineries, drilling platforms, chemical plants and paper mills.

Please reload

Featured Posts

BASF Chemical Plant

October 22, 2016

1/1
Please reload

Recent Posts
Please reload

Archive