top of page

Coppus RLA Best Sealed With Isomag Magnetic Bearing Isolators

Water contamination in bearing oil is a common recurring issue for steam turbines in the oil and gas industry. Labyrinth isolators fail to stop condensate from entering the bearing housing as steam dissipates from the carbon box. PBF Energy in Toledo, Ohio has many of steam turbines in operation, and a common maintenance procedure is to drain the water out of the bearing housings. After another failure on their Coppus RLA 20 steam turbine, a sales representative from John Crane introduced the refinery to Isomag magnetic bearing isolators as the perfect solution to their water ingress problem. PBF specified Isomag magnetic bearing isolators. It was a hot job, and needed a quick turnaround. Isomag was able to measure, engineer, and manufacture three custom fitted seals for them in less than 48 hours.

Copus RLA20 Steam Turbine

PBF put an end to this issue by replacing the existing labyrinth isolators with Isomag magnetic face isolators. Since installed in 2012, the end user reports that the seals are running smoothly at low temperatures with no evidence of water contamination. The old practice of evaporating water out of the oil twice a year is no longer necessary.

A brochure for Isomag bearing isolators for steam turbines can be found here. Also as a reminder, Isomag bearing isolators can be custom made to fit your machine. Contact our customer service team and we will help you find the ideal solution for your needs.

0 views0 comments


bottom of page