top of page

Sumitomo Cyclo Gearmotor Sealed With Isomag Magnetic Seals

FITT Resources in New South Wales, Australia found Isomag magnetic face bearing isolators to be the perfect solution for their rebuild on a Sumitomo Cyclo gearbox motor. The Sumitomo Cyclo gearmotor was experiencing problems of egress of the ISO-220 lubrication from the bearing housing, eventually causing the gearbox to fail. Their mining customer needed longer run times on these gearboxes. The culprit of this Sumitomo Cyclo gearbox are the lip seals that are installed. Oil seals wear out in about 6-8 months on continuous use. Then the loss of lubrication from the bearing housing starts. On top of that, the lip seal wears a grove into the shaft, making it necessary to either refurbish the shaft or get a new one when it's time to repair.

Sumitomo Cyclo Gearmotor

Isomag magnetic face bearing isolators are a positive seal that wont damage the shafts of your gearbox, and work in horizontal or vertical up or down positions for the right angle gearboxes. Isomag magnetic face bearing isolators also work perfectly in grease lubrication environments. The Isomag bearing isolators were installed in February of 2015 and are still running leak free today. Isomag bearing isolators have a guaranteed life of 5 years, and usually run for 10+.

A brochure for Isomag bearing isolators for gearboxes can be found here. Also as a reminder, Isomag bearing isolators can be custom made to fit your machine. Contact our customer service team and we will help you find the ideal solution for your needs.

0 views0 comments


bottom of page